Concrete Central is proud to supply Dayton Superior products.
Forming Products & Accessories
A clear sealer that will not yellow under exposure to sunlight.
A uniform blend sealer of mineral spirits and boiled linseed oil used for protecting exterior concrete.
Cure & Seal 25%
An acrylic copolymer cure, seal and dustproofing compound in an aromatic solvent containing 25% solids with special U.V. stabilizers.
Cure & Seal 30%
A 30% solids acrylic copolymer cure, seal and dustproofing compound in an aromatic solvent containing special U.V. stabilizers.
Cure & Seal 1315
A water based acrylic copolymer containing 25% solids that offers outstanding curing, sealing and dustproofing for freshly finished concrete surfaces.
Cure & Seal 309
A water based acrylic copolymer that offers a combination curing, sealing and dustproofing for freshly finished concrete surfaces.
Clear Cure VOC
A VOC compliant, water based clear resin dissipating curing compound.
A scientifically formulated clear, non-yellowing sealer comprised of methyl methacrylate polymers that dries to a durable, high gloss finish which not only protects, but also beautifies floors.
An Earth Friendly (EF) acrylic, non-yellowing concrete sealer that may contribute to LEED Credits.
A ready-to-use, water based solution of sodium orthosilicate that reacts with the free lime in the concrete to provide a chemically hardened surface.
Sure Hard Densifier
A colorless, odorless solution of specialized reactive chemicals that penetrate concrete surfaces to seal, densify and harden the material.
a concentrated re-emulsifiable primer designed to be used with the Dayton Superior Levelayer, Econolevel and Level Topping products and works as both a sealer to help prevent pinholes in floor leveling materials and as a bonding agent to ensure good adhesion.
A trowel applied, highly polymer modified, cement based, rapid setting underlayment.
Acrylic Bonding Agent
A ready to use, non-reemulsifiable acrylic admixture and bonding agent designed to improve the adhesion and durability of concrete, masonry, stucco, terrazzo and portland cement-sand mixes to horizontal and vertical concrete and other surfaces.
PVA Bonding Agent
A concentrated reemulsifiable / rewettable polyvinyl acetate (PVA) emulsion for use as a bonding agent for application on concrete, cement board or masonry prior to installing patches, mortars, stuccos and plasters.
A proprietary emulsion of unique organic compounds designed to minimize moisture loss from fresh concrete.
A V.O.C. compliant, ready-to-use, petroleum based, chemically reactive concrete form release.
A heavy duty concrete stripper and degreaser that is used for general cleaning and removal of curing compounds from concrete floors.
Epoxy Rebar Spray
An epoxy coating packaged in a ready-to-use, 11-ounce spray can. The color of this epoxy coating is green.
A non-shrink, non-corrosive, non-metallic cementitious grout.
A matched system of blended aggregates and pre-measured 100% solids, very low exotherm epoxy resin.
The Dayton Superior Logo and product names and descriptions are trademarks of the Dayton Superior Corporation. (c) 2015 All rights reserved.